Triumph Daytona 675R ABS

Back
Overview
Tech Spec
Colours
Offers

Overview

In the Daytona 675R, we've made exceptional the new standard. This is a true track day tool. Focused. Committed. Taking our experience gained on track and road with the outgoing bike and combining the latest developments in engineering technology and thinking, we're giving you an even faster, better handling, easier riding bike.

The result is a bike which is 1kg (2.2lb) lighter than the old model with a new triple motor that delivers even more power all the way through to 14,400 rpm redline. The new frame geometry, mass centralisation and race-derived Öhlins suspension enables razor sharp handling and confidence-inspiring feedback. Add Brembo brakes, a quickshifter, carbon trim and some subtle styling details and you know you're riding a true thoroughbred motorcycle.

Engine


Construction

The 2013 Daytona 675Rs engine is now even more focussed. We've built it with a new shorter stroke and wider bore dimensions for even more useable power and acceleration. The cylinder block is now cast separately from the upper crankcase to cope with higher pressures, more torque and more power.

In addition to the 675, the R now comes with a quickshift gearchange, reprogrammed to give you even faster, smoother shifting.
Internals

With twin injectors per cylinder the new Daytona can draw more fuel quicker when you open the throttle fully and demand more from the engine.

A first for a production Triumph, we have now fitted substantially lighter titanium valves to cope better with the higher revs. This also means lighter valve springs can be used, reducing valve train wear and friction.

We also knew that the weight reduction was enough to give us the space to add some metal to the valves without compromising the valve train, so the top of the valve 'mushroom' heads were reshaped to improve gas flow around the valve and into the combustion chamber. This means better efficiency and a boost in torque at low and medium revs.
Sound

We enlarged the through-airflow headstock so that the intake mouth is positioned in the highest pressure zone centrally at the front of the bike. Improving flow efficiency, so that air passes in a straight line through the centre of the headstock to the airbox.

And when the air passes through the centre of the cockpit zone, it gives you even more of that distinctive three-cylinder intake snarl. And it's not just the volume of the sound that's better, it's now there over a much wider range of revs for an even more focussed, involving ride than ever before.
Performance

The overall theme for this bike is more torque, better acceleration and more useable power.

One of the main contributors to this is the improved bore and stroke. We built the latest Daytona 675R with a shorter stroke allowing us to set a 500rpm higher rev ceiling at 14,500 and we increased power to 128PS and maximum torque to 75Nm. So the new engine now gives you higher power for longer. Wringing even more performance out of the bike as well bringing more of the rider out of you.

Chassis


Frame

The new Daytona 675R frame is made from eight castings. That means fewer welds and a lighter construction with no loss of strength or stiffness for a more focussed ride.

We sharpened the geometry with a change in the rake from 23.9° to 22.9° and a reduction in trail from 89.1mm to 87.2mm. And now, the swingarm pivot position is adjustable so you can tailor the handling more precisely to your riding style and the conditions.
Suspension

We fitted the 675R with Öhlins NIX30 forks for reduced friction, finer damping control and a wider range of adjustability compared with the standard equipment.

The rear shock is an Öhlins TTX 'twin tube' unit that delivers more consistent and predictable performance on the track and is easily adjustable for spring preload, ride height and rebound and compression damping.
Swingarm

The 2013 Daytona's new rigid aluminium swingarm is designed asymmetrically to make room for the improved exhaust system. You can now even adjust its pivot and personalise the bike's geometry, fine-tuning it to suit your riding style and conditions.
Brakes

We fitted the 675R with the latest Brembo Monobloc front brake callipers in place of the standard bike's Nissin units as they are especially resistant to heat fade. Being machined from single blocks of aluminium rather than two sections bolted together, you also get increased strength and reduced distortion under the extreme pressures of heavy braking as experienced in track use - which in turn improves feel and feedback to you, the rider.
Wheels and Tyres

Shaving weight off a bike shaves milliseconds off a lap time. So we reduced the 675R's wheel weight because, with their gyroscopic effect, weight lost here is like eight times the weight lost elsewhere on a bike. We fitted new wheels with the new rear being 0.5kg lighter than the outgoing model. And Pirelli Dragon SuperCorsa tyres for optimum performance.
Steering Damper

The Daytona 675R is fitted with new, state-of-the-art KYB centre-fixed cartridge forks that use an internal damping cartridge which is rigidly located at both ends, rather than floating at one end as in conventional designs. Because it's supported by thinner walls, it has more room for the damping piston, so a larger diameter one can be used, improving damping accuracy.
Riding Position

We have improved the 675Rs riding position by raising the bars slightly but with a 10mm reduction in seat height. Every bit a focussed supersport riding stance, designed to get the best out of you in track conditions.
Details

High-spec carbon fibre cockpit infills and front mudguard - light and strong.

At the rear, a styled hugger sits neatly on the swingarm. Looks fantastic and keeps the dirt off your Öhlins suspension.
Mass Centralisation

By relocating the silencer to under the engine, rapid direction changes are now more fluid and more controlled. Rider input is rewarded with an incredibly controlled response.

Concentrating as much of the mass of the bike at the centre has increased the Daytona 675s agility and grip, so you can achieve higher lean angles through the corners. And you'll find that the bike now responds even more readily to your input through the handlebars.

Equipment and Technology


ABS

The very latest switchable ABS system is fitted, weighing just 1.5kg (3.3lb) and having a track setting which allows rear wheel drift. The system allows more aggressive braking in good conditions meaning that ABS will only activate when crossing wet surfaces or the side of the track. It works so well that, on a perfect track day, you won't even notice it.
Slip-Assist Clutch

The new clutch design increases the friction so that lighter springs are needed. This reduces the effort needed at the clutch lever, making life easier for you around the track.
Quickshifter

Get the real race feel with clutchless gear changes without even having to back off the throttle, maximising acceleration.
Removable Number Plate and Indicators

As with the 675 you can remove the already slender number plate and rear indicator mounting by simply removing three bolts, just for track day use.
Programmable Rev Lights

Programmable gear change indicators let you manually set up where in the rev range you want the lights to come on and prompt a gear change.
Instruments and Computer

The Daytona already had a lap timer, two trip computers, gear change indicators, shift lights and a clock. Now, the 675Rs instruments are also configured to show fuel gauge, tyre pressures (where optional Tyre Pressure Monitoring System is fitted) and ABS switching. So you know more of what's going on as you ride.
Immobiliser

To protect your Daytona 675R from the wrong kind of attention, we've added a high technology security system. It detects a microchip in the key body and if it's not present the ignition system is disabled.

This prevents a copy of the correct key being used to switch the bike on.
Optional TPMS

Especially on a bike as track-focussed as the Daytona 675R, a change tyre pressure can alter handling dramatically. Our Tyre Pressure Monitoring System will let you know any change in pressure before it becomes an issue.

 

 

Engine Type

Liquid-cooled, 12 valve, DOHC, in-line 3-cylinder

Displacement CC

675.0

Bore X Stroke

76mm x 49.6

Max Power Output

126BHP @ 12500

Max Torque

74NM @ 11900

Oil Capacity

3.6 litres

Fuel Tank Capacity

17.4 litres

Transmission Type

6-speed, close ratio

Dimensions LxWxH

2045mm x 695mm x 1112mm

Wheelbase

1375mm

Seat Height

830mm

Kerb Weight

189 kg

Tyre Size Front

120/70 ZR 17

Tyre Size Rear

180/55 ZR 17

Brakes Type Front

Twin 310mm floating discs, Brembo 4-piston radial mono-block calipers, switchable ABS

Brakes Type Rear

Single 220mm disc, Brembo single piston caliper, switchable ABS

Daytona 675 R TriStar Finance

 

FINANCING YOUR TRIUMPH

Riders love control. So if you like to control your motorcycling expenditure and would also like a brand new Triumph every two or three years, you should be considering a TriStar PCP (Personal Contract Purchase) for your next bike. With three end of contract options, you’re in the riding seat!

 

TriStar Finance Representative Example

 

36 Repayments of£109.00
Optional Final Repayment of£6335.00
Total Amount Payable£12505.63
Interest Rate (Fixed)6.65%
Representative APR6.9% APR
Cash Price£10950.00
Deposit£2246.63
Total Amount of Credit£8703.37
Agreement Duration37 Months
Purchase Fee*£10.00

Terms and conditions

*Included in optional final repayment.

Credit is subject to status and is only available to UK residents aged 18 and over. TriStar Personal Contract Purchase is only available through Triumph Motorcycle Finance provided by Black Horse Ltd, St William House, Tresillian Terrace, Cardiff, CF10 5BH

The Representative Example is based on 5000 miles per annum.

With TriStar Personal Contract Purchase you have the option at the end of the agreement to:
(1) Return the motorcycle and not pay the Optional Final Repayment. If the motorcycle is in good condition (fair wear and tear accepted) and has not exceeded the allowed mileage you will have nothing further to pay. If the bike has exceeded the allowed mileage a charge for excess mileage will apply – in this example 6p per mile + VAT for any excess mileage up to 4,999 miles and 12p per mile + VAT for any excess mileage exceeding 4,999 miles. 
(2) Pay the Optional Final Repayment to own the motorcycle or
(3) Part exchange the motorcycle subject to settlement of your existing finance agreement; new finance agreements are subject to status.

Enquire about this offer